Alphatech New Link Lift Watch 50 Guía de instalación descargar pdf (Pagina 16)

1.4.5. Camera

The module of colour camera is integrated into the

panel of Fermax by a sub-board with mounted LED

illumination and a sensor of surrounding light.

1. Camera module

2. The main board of the camera - 3 LEDs for

illumination

3. Mounting column for the main board

4. Sensor of surrounding illumination

5. Mounting of the main board

1.4.6. Expansion module Fermax PBX EXP

The expansion module has got two connectors

CC5, one is used for connection towards the

basic module (Fermax PBX DP) and the second

one is used for connection of the following

module. For interconnection please use cable

Fermax PBX CC5. Besides connectors 5, you can

also find on the expansion module the connector

8 for connection of the pushbuttons. For

interconnection please use the cable Fermax PBX

CC8. Each colour of the cable is assigned exactly to the specific pushbutton, see

picture for more details.

Connection of pushbuttons:

Colour of wire

Position number on Fermax PBX EXP

1 2 3 4 5 6 7

Black 11 19 27 35 43 51 59

Orange 12 20 28 36 44 52 60

Green 13 21 29 37 45 53 61

White 14 22 30 38 46 54 62

Red 15 23 31 39 47 55 63

Yellow 16 24 32 40 48 56 64

Brown 17 25 33 41 49 57

Blue 18 26 34 42 50 58

The numbering of positions is shown on the picture 5. All numbers of pushbuttons

refer to the settings of the door phone panel (see more in the programming section).

Picture 4 Cable Fermax PBX CC8

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Sin comentarios

Alphatech New Link Lift Watch 50 Guía de instalación Pagina 16